Manufacturing Companies for Analog Pressure Switch - Metal Dome Switch Supplier/Suppliers – Xinhui

Short Description:

Product Detail

Product Tags

Feedback (2)

Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, trust the first and management the advanced" for Contact Pressure Sensor, Miniature Pressure Transducer, Membrane Touch Switch, Welcoming interested companies to cooperate with us, we look forward to having the opportunity of working with companies around the world for joint growth and mutual success.

Manufacturing Companies for Analog Pressure Switch - Metal Dome Switch Supplier/Suppliers – Xinhui Detail:

Button shrapnel

Guozi tablets generally refer to button shrapnel

The button shrapnel (also commonly known as the metal dome, snap dome) is made of ultra-thin (0.05mm-0.1mm thickness) and ultra-thick (generally harder) stainless steel 301 or 304 materials. The button shrapnel is an important part of the switch.

Chinese name : Button shrapnel

Also known as : Pot slices

Material : Stainless steel 301 or 304

Diameter : 3mm to 20mm

Button shrapnel is mainly used in membrane switches, dome contact switches, PCB boards, FPC boards, medical equipment and other products. The working principle of the button shrapnel: The button shrapnel on the membrane button is located on the conductive part of the PCB board (mostly located above the golden fingers on the circuit board). When pressed, the center point of the shrapnel is concave and touches the circuit on the PCB. , Thus forming a loop, the current passes through, and the whole product can work normally.

Generally, conventional button shrapnels can be divided into round metal shrapnel, cross-shaped metal shrapnel, triangular metal shrapnel, and oval metal shrapnel according to their different shapes. The diameter ranges from 3mm to 20mm, and the strength ranges from 100g to 600gf. According to the surface electroplating treatment, it can be divided into: gold plating, nickel plating, silver plating, bright surface and so on. There are two types of single-sided electroplating and double-sided electroplating.

Related Parameters

Membrane switch parametersameters
Electronic properties	Working voltage:≤50V（DC）	Working current:≤100mA
	Contact resistance:0.5~10Ω	Insulation resistance:≥100MΩ（100V/DC）
	Substrate pressure resistance:2kV（DC）	Rebound time:≤6ms
	Loop resistance: 50 Ω, 150 Ω, 350 Ω, or determined according to the user’s needs.	Insulation ink withstand voltage:100V/DC
mechanical propertiesti	Reliability service life:>One million times	Closure displacement: 0.1 ~ 0.4mm (tactile type) 0.4 ~ 1.0mm (tactile type)
	Working force: 15 ~ 750g	Migration of conductive silver paste: at 55 ℃, temperature 90%, after 56 hours, it is 10m Ω / 50VDC between two wires
	There is no oxidation and impurity on the silver paste line	The line width of silver paste is greater than or equal to 0.3mm, the minimum interval is 0.3mm, the rough edge of line is less than 1 / 3, and the line gap is less than 1 / 4
	Pin spacing standard 2.54 2.50 1.27 1.25mm	The bending resistance of outgoing line is 80 times with d = 10 mm steel rod.
Environmental parametersme	Operating temperature:－20℃～+70℃	Storage temperature: – 40 ℃ ~ + 85 ℃, 95% ± 5%
Environmental parametersme	Atmospheric pressure:86～106KPa
Printing index index	The printing size deviation is ± 0.10 mm, the outline side line is not clear, and the weaving error is ± 0.1 mm	The chromatic deviation is ± 0.11mm/100mm, and the silver paste line is completely covered by the insulating ink
	No ink scattered, no incomplete handwriting	The color difference is not more than two levels
	There shall be no crease or paint peeling	The transparent window shall be transparent and clean, with uniform color, without scratches, pinholes and impurities.

Product Show

Metal Dome Switch (10)

Product detail pictures:

Related Product Guide:

We keep improving and perfecting our products and service. At the same time, we work actively to do research and development for Manufacturing Companies for Analog Pressure Switch - Metal Dome Switch Supplier/Suppliers – Xinhui , The product will supply to all over the world, such as: UK, Muscat, Switzerland, Our company covers an area of 20, 000 square meters. We have more than 200 workers, professional technical team, 15 years' experience, exquisite workmanship, stable and reliable quality, competitive price and sufficient production capacity, this is how we make our customers stronger. If you have any inquiry, please do not hesitate to contact us.

Computer Sewing Machine Membrane Switch

El Light-Emitting Membrane Switch

Learning Machine Membrane Switch

Luminous Membrane Switch

Massage Chair Membrane Switch

Membrane Switch Overlay

Pcb Key Switch

Pressure Switch Membrane

Rubber Membrane Switch

Three-Dimensional Membrane Switch

The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!

By Eunice from Benin - 2018.06.12 16:22

Speaking of this cooperation with the Chinese manufacturer, I just want to say"well dodne", we are very satisfied.

By Henry from San Diego - 2017.09.30 16:36

Write your message here and send it to us

Manufacturing Companies for Analog Pressure Switch - Metal Dome Switch Supplier/Suppliers – Xinhui